ZYXEL NWA90AX PRO AX3000 WiFi 6 Dual-Radio NebulaFlex Access Point
- Read our FAQs before ordering
- Need Help? Chat with us.
SPECIFICATIONS
Wireless |
|
Standard |
IEEE802.11 ax/ac/n/g/b/a |
MIMO | MU-MIMO |
Wireless speed |
2.4GHz: 575 Mbps 5GHz: 2400 Mbps |
Frequency band |
2.4 GHz: USA (FCC): 2.412 to 2.462 GHz Europe (ETSI): 2.412 to 2.472 GHz |
Bandwidth | 20-, 40- ,80-, and, 160-MHz |
Conducted typical transmit output power*1 |
US (2.4GHz/5GHz): 23/28 dBm EU (2.4GHz/5GHz): 20/28 dBm |
RF Design |
|
Standard | IEEE802.11 ax/ac/n/g/b/a |
MIMO | MU-MIMO |
Wireless speed |
2.4GHz: 575 Mbps 5GHz: 2400 Mbps |
Frequency band |
2.4 GHz: USA (FCC): 2.412 to 2.462 GHz Europe (ETSI): 2.412 to 2.472 GHz 5 GHz: USA (FCC): 5.15 to 5.35 GHz; 5.470 to 5.850 GHz European (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 GHz |
Bandwidth | 20-, 40- ,80-, and, 160-MHz |
Conducted typical transmit output power*1 |
US (2.4GHz/5GHz): 23/28 dBm EU (2.4GHz/5GHz): 20/28 dBm |
RF Design |
|
Antenna type | Internal Antenna |
Antenna gain |
2.4 GHz: 3 dBi, 2x2:2SS 5GHz: 4 dBi, 3x3:2SS |
Minimum receive sensitivity | Min. Rx sensitivity up to -99 dBm |
WLAN Feature |
|
Band steering | Yes |
WDS/Mesh*2 | Yes |
Fast roaming | Pre-authentication, PMK caching, and 802.11r/k/v |
DCS | Yes |
Load balancing | No |
Security |
|
Encryption |
WEP WPA WPA2-PSK WPA3 |
Authentication |
WPA WPA2-Enterprise EAP IEEE 802.1X RADIUS authentication |
Access management |
L2-isolation MAC filtering Rogue AP detection |
Networking |
|
IPv6 | Yes |
VLANs | Yes |
WMM | Yes |
U-APSD | Yes |
Management |
|
Operating mode |
Nebula cloud managed Standalone |
ZON Utility |
Discovery of Zyxel switches, APs and gateways Centralized and batch configurations: IP configuration IP renew Device reboot Device locating Web GUI access Firmware upgrade Password configuration |
Web UI/CLI | Yes |
SNMP | No |
Physical Specifications |
|
Item |
Dimensions (WxDxH)(mm/in.) Weight (g/lb.) |
Packing |
Dimensions (WxDxH)(mm/in.) Weight (g/lb.) |
Included accessories |
Power adapter Mount plate Mounting screws |
MTBF (hr) | 420,539 |
Physical Interfaces |
|
Ethernet port | 1 x 1/2.5Gbps LAN |
Power |
Power Adapter: AC 100 - 240V - 50/60 Hz 0.3A; Output: DC +12V 2A PoE (802.3at): power draw 20.5 W |
PoE modes |
IEEE802.3af: Not supported IEEE802.3at: Unrestricted IEEE802.3bt: Unrestricted |
Environmental Specifications |
|
Operating |
Temperature Humidity |
Storage |
Temperature Humidity |
Certifications |
|
Radio |
FCC Part 15C FCC Part 15E ETSI EN 300 328 EN 301 893 LP0002 EN 60601-1-2 |
EMC |
FCC Part 15B EN 301 489-1 EN 301 489-17 EN55022 EN55024 EN61000-3-2/-3 BSMI CNS13438 |
Safety |
Safety EN 60950-1 IEC 60950-1 BSMI CNS14336-1 |