TP-LINK TL-SG2218P 18-Port Gigabit Smart Switch with 16-Port PoE+

Hardware Features

Standards and Protocols

IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3az, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.1x

Interface

16× 10/100/1000 Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX)

2× Gigabit SFP Slots

Network Media

10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)

100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m)

1000BASE-X: MMF, SMF

Fan Quantity

1

Power Supply

100-240V AC, 50/60Hz

PoE Ports (RJ45)

Standard: 802.3at/af compliant

PoE+ Ports: 16 Ports

PoE Power Budget: 150 W*

Dimensions

17.3 × 7.1 × 1.7 in. (440 × 180 × 44 mm)

Mounting

Rack Mountable

Max Power Consumption

181.4 W (110 V/60 Hz) (with 150 W PD connected)

178.3 W (220 V/50 Hz) (with 150 W PD connected)

Max Heat Dissipation

619.06 BTU/hr (110 V/60 Hz) (with 150 W PD connected)

608.52 BTU/hr (220 V/50 Hz) (with 150 W PD connected)

Performance

Switching Capacity: 36 Gbps

Packet Forwarding Rate: 26.78 Mpps

MAC Address Table: 8K

Packet Buffer Memory: 4.1 Mbit

Jumbo Frame: 9 KB

Quality of Service

802.1p CoS/DSCP priority

8 priority queues

Priority Schedule Mode (SP/WRR)

Queue Weight Config

Bandwidth Control (Port/Flow based Rating Limit)

Smoother Performance

Storm Control (Multiple Control Modes: kbps/ratio)

L2 and L2+ Features

16 IP Interfaces

Static Routing (32 IPv4/IPv6 Static Routes)

DHCP Server

DHCP Relay (DHCP Interface Relay, DHCP VLAN Relay)

DHCP L2 Relay

Static ARP, Proxy ARP, Gratuitous ARP

Link Aggregation (Static, 802.3ad LACP, Up to 8 aggregation groups and up to 8 ports per group)

Spanning Tree Protocol (802.1D STP, 802.1w RSTP, 802.1s MSTP)

Loopback Detection

Flow Control (802.3x Flow Control)

Mirroring (Port, CPU, One-to-One, Many-to-One, Flow-Based, Ingress/Egress/Both)

Device Link Detect Protocol (DLDP)

802.1ab LLDP/ LLDP-MED

Advanced Features

Automatic Device Discovery, Batch Configuration, Batch Firmware Upgrading, Intelligent Network Monitoring, Abnormal Event Warnings, Unified Configuration, Reboot Schedule

VLAN

VLAN Group (Max. 4K VLAN Groups), 802.1Q tag VLAN, MAC VLAN (12 Entries), Protocol VLAN, GVRP, Voice VLAN

Access Control List

Support up to 230 entries, Time-Range (Time Slice, Week Time-Range, Absolute Time-Range, Holiday), Time-based ACL, MAC ACL, IP ACL, IPv6 ACL, Combined ACL, Rule Operation (Permit/Deny), Policy Action (Mirror, Rate Limit, Redirect, QoS Remark), ACL Rules Binding (Port Binding, VLAN Binding), Actions for flows (Mirror, Redirect, Rate Limit, QoS Remark)

Security

AAA, 802.1X Port based authentication, MAC (Host) based authentication, Authentication Method includes PAP/EAP-MD5, MAB, Guest VLAN, Support Radius authentication and accountability, IP/IPv6-MAC Binding (512 Binding Entries), DHCP Snooping, DHCPv6 Snooping, ARP Inspection, ND Detection, IP Source Guard, IPv6 Source Guard, DoS Defend, Static/Dynamic/Permanent Port Security (Up to 64 MAC addresses per port), Broadcast/Multicast/Unicast Storm Control (kbps/ratio control mode), Port Isolation, Secure web management through HTTPS with SSLv3/TLS 1.2, Secure Command Line Interface (CLI) management with SSHv1/SSHv2, IP/Port/MAC based access control

IPv6

IPv6 Static Routing and ACL, IPv6 Dual IPv4/IPv6, IPv6 Interface, Multicast Listener Discovery (MLD) Snooping, IPv6 neighbor discovery (ND), Path maximum transmission unit (MTU) discovery, Internet Control Message Protocol (ICMP) version 6, TCPv6/UDPv6, IPv6 applications (DHCPv6 Client, Ping6, Tracert6, Telnet(v6), IPv6 SNMP, IPv6 SSH, IPv6 SSL, Http/Https, IPv6 TFTP)

MIBs

MIB II (RFC1213), Bridge MIB (RFC1493), P/Q-Bridge MIB (RFC2674), Radius Accounting Client MIB (RFC2620), Radius Authentication Client MIB (RFC2618), Remote Ping, Traceroute MIB (RFC2925), Support TP-Link private MIBs, RMON MIB(RFC1757, rmon 1,2,3,9)

Management

Omada App (through Omada Cloud-Based Controller, OC300, OC200, Omada Software Controller), Centralized Management (Omada Cloud-Based Controller, Omada Hardware Controller OC300, Omada Hardware Controller OC200, Omada Software Controller), Cloud Access (through Omada Cloud-Based Controller, OC300, OC200, Omada Software Controller), Zero-Touch Provisioning (Requiring the use of Omada Cloud-Based Controller), Management Features (Web-based GUI, Command Line Interface (CLI) through telnet, SNMPv1/v2c/v3, SNMP Trap/Inform, RMON (1,2,3,9 groups), SDM Template, DHCP/BOOTP Client, Dual Image, Dual Configuration, CPU Monitoring, Cable Diagnostics, EEE, SNTP, System Log)

Others

Certification: CE, FCC, RoHS

Package Contents

TL-SG2218P, Power Cord, Installation Guide, Rackmount Kit, Rubber Feet

System Requirements

Microsoft® Windows® XP, Vista™ or Windows 7/8/10/11, MAC® OS, NetWare®, UNIX® or Linux.

Environment

Operating Temperature: 0–50 ℃ (32–122 ℉); Storage Temperature: -40–70 ℃ (-40–158 ℉); Operating Humidity: 10–90% RH non-condensing; Storage Humidity: 5–90% RH non-condensing