Tp-Link CPE710 5GHz AC 867Mbps 23dBi Outdoor CPE

Processor

Qualcomm 750 MHz CPU, MIPS 74Kc

Memory

128 MB DDR2 RAM, 16 MB Flash

Interface

• 1 × 10/100/1000 Mbps Shielded Ethernet Port (LAN/PoE)
• 1 × Reset Button

Power Supply

• Passive PoE via LAN (+4,5 pins; –7,8 pins)
• Voltage range: 16–27 V DC

Dimensions (W × D × H)

366 × 280 × 207 mm (14.4 × 11.0 × 8.1 in)

Antenna Gain

23 dBi

Antenna Beamwidth

9° (Azimuth) / 7° (Elevation)

Protection

• 15 kV ESD Protection
• 6 kV Lightning Protection

Enclosure

• Material: Outdoor PC‑stabilized plastic
• Weatherproof: IP65 (water/dust‑proof)

Wireless Standards

IEEE 802.11a/n/ac

Wireless Speeds

• Up to 867 Mbps (80 MHz, dynamic)
• Up to 400 Mbps (40 MHz, dynamic)
• Up to 173.4 Mbps (20 MHz, dynamic)

Frequency

5.15–5.85 GHz

Transmission Power

Max. 27 dBm (adjustable by 1 dBm steps)

Network Configuration

• WAN: Static / Dynamic / PPPoE
• LAN: Static / Dynamic / DHCP
• Forwarding: ALG / UPnP / Virtual Server / Port Trigger
• Security: SPI Firewall, Ping Forbidden, DoS Protection
• Access Control
• Static Routing
• Bandwidth Control
• IP & MAC Binding

Wireless Configuration

• Channel Width: 20/40/80 MHz selectable
• Auto Channel Selection
• Transmit Power Control
• Dynamic Frequency Selection (DFS)
• WDS enable/disable
• Security: WPA/WPA2, WPA‑PSK/WPA2‑PSK (AES/TKIP)
• SSID Broadcast Enable/Disable
• Multi‑SSID with VLAN Tagging (AP mode only)
• Distance/ACK Timeout Setting
• MAC Address Filter
• Advanced: Beacon Interval, RTS Threshold, Fragmentation Threshold, DTIM Interval, AP Isolation, Short GI, Wi‑Fi Multimedia
• Long‑range PtP

Management Features

• Discovery & remote management via Pharos Control app
• HTTP/HTTPS web‑based management
• System log
• SNMP agent (v2c)
• Ping Watchdog
• Dynamic DDNS
• SSH server

System Tools

• Indicators: Signal Strength, Noise, Transmit CCQ, CPU, Memory
• Monitors: Throughput, Stations, Interfaces, ARP, Routes, WAN, DHCP
• Spectrum Analyzer
• Speed Test
• Ping
• Traceroute
• Antenna Alignment
• System‑level Optimizations: IGMP Snooping/Proxy for multicast

PoE Adapter Features

• Dimensions: 85.8 × 43.9 × 29.7 mm
• Interfaces:
 – 1 × AC jack with earth ground
 – 1 × 10/100/1000 Mbps shielded Ethernet (power + data)
 – 1 × 10/100/1000 Mbps shielded Ethernet (data)
• Remote Reset Button
• Power Status LEDs (green)
• Input: 100–240 VAC, 50/60 Hz
• Output: 24 V DC, 0.5 A max (+4,5; –7,8 pins; supports up to 60 m PoE)
• Efficiency: > 84.29%
• Certifications: CE, FCC, UL, IC, GS, PSB, SAA, S‑Mark, KC

Others

• Certification: CE, FCC, RoHS, IP65, IC
• Package Content: Outdoor Wireless CPE; 24 V 0.5 A Passive PoE adapter; Pole mounting kits; AC power cord; Installation guide
• System Requirements: Microsoft Windows 98SE/NT/2000/XP/Vista/7/8/10; macOS; NetWare; UNIX; Linux (Chrome, Safari, Firefox recommended; IE not recommended)
• Environment:
 – Operating Temp: –40 ℃ to 70 ℃ (–40 ℉ to 158 ℉)
 – Storage Temp: –40 ℃ to 70 ℃ (–40 ℉ to 158 ℉)
 – Operating Humidity: 10–90% RH non‑condensing
 – Storage Humidity: 5–95% RH non‑condensing